UL 1424 FPLR Flexible Fire Alarm Cable with UL Standard for Life Safety Circuits

Product Description

UL 1424 FPLR TYPE, Power Limited Shielded 2*1.0mm Fire Alarm Cable

APPLICATION

1. Areas where people will remain in occupation for short time, e.g. schools, shopping malls, mass transit systems like metro stations etc.
2. Services where circuit integrity is very important under fire conditions, e.g. Special equipment in hospital
3. Essential safety circuit, e.g. Fire detection, fire alarm, voice alarm etc.
4. Power supply to equipment used in fire-fighting, e.g. Sprinkler pumps
5. In large buildings where fire strategy involves evacuation of occupants in a phased manner.

 

I. Shielded fire alarm cable (FPLR & FPL) is a kind of cable with shielding around cabling which protects the wires inside from interference or electronic noise from nearby cables and wires.

II. Type FPLR power-limited fire alarm riser cable is suitable for use in a vertical run in a shaft or to penetrate one or more floors. The cable has fire-resistant characteristics capable of preventing fire travel from floor to floor.

III. Type FPL power-limited fire alarm cable is suitable for general purpose fire alarm use. The cable is fire resistant to the spread of fire. But it doesn't include installation in riser, ducts and plenums unless the cable is installed in conduit.

IV. Category Fire Alarm Cables

• Certificate: UL Listed
• Standard: UL 1424 / NEC Article 760
• Temperature: -20°C to 75°C
• Voltage: 300 V
• Compliance: FPLR/CMR/CL3R, flame test UL 1666 UL1424
• FPL/CM/CMG/CL3, flame test UL 1685 
• Application: Riser fire alarm wiring, General purpose fire alarm wiring

Available size (Solid conductor)

Size	Conductor type	Conductor dia. (mm)	Conductor sect. (mm2)	Max DCR at 20°C, Ω/km	Ref. No.
22 AWG x 4C	Solid	0.64 x 4C	0.32	59.1	C0301
18 AWG x 2C	Solid	1.02 x 2C	0.82	21.4	C0302
18 AWG x 4C	Solid	1.02 x 4C	0.82	21.4	C0303
16 AWG x 2C	Solid	1.29 x 2C	1.31	13.5	C0304
16 AWG x 4C	Solid	1.29 x 4C	1.31	13.5	C0305
14 AWG x 2C	Solid	1.63 x 2C	2.08	8.45	C0306
12 AWG x 2C	Solid	2.05 x 2C	3.31	5.31	C0307

Available size (Stranded conductor)

Size	Conductor type	Conductor dia. (mm)	Conductor sect. (mm2)	Max DCR at 20°C, Ω/km	Ref. No.
22 AWG x 4C	7 stranded	0.73 x 4C	0.32, min	55.4	C0311
18 AWG x 2C	7 stranded	1.16 x 2C	0.81, min	21.9	C0312
18 AWG x 4C	7 stranded	1.16 x 4C	0.81, min	21.9	C0313
16 AWG x 2C	7 stranded	1.46 x 2C	1.28, min	13.7	C0314
16 AWG x 4C	7 stranded	1.46 x 4C	1.28, min	13.7	C0315
14 AWG x 2C	7 stranded	1.85 x 2C	2.04, min	8.60	C0316
12 AWG x 2C	7 stranded	2.32 x 2C	3.26, min	5.41	C0317

 

 

 

Package

  

QUALITY POLICY:
Exactcables will manufacture cable according to customer's requirement in an effective and profitable manner. To achieve the above, the Management is committed to the following:

 

• Maintain the ISO 9001 Quality Management System
• Continual review and improvement of the effectiveness of the Quality Management System
• Provide all necessary resources to manufacture quality cable
• Create a safe and technologically advanced working environment
• Respect for the environment in which we operate
• Training and communication to keep employees informed and involved

Every employee has the responsibility to ensure that these requirements are met.


 

FAQ:
Q1: What kind of cable do you produce?
A: We specialized in producing Fire alarm cables, Alarm/security cables, Speaker cables, Coaxial cables, Data cables, HDMI cables, telecommunication cables, telephone cables, power cables and other various of cables and wires
We also provide cable accessory products such as connector, cable clip,cable tie,crimping tool, antenna dishe,splitters,amplifer,optical receiver,optical transmitter etc

Q2: What's your MOQ? Can you offer free samples?
A: Our MOQ is 10KM per item. Free samples can be sent to you if available in stock,freight cost need to be paid by your side.

Q3: What's your delivery time?
A: Normally, our delivery time is 15 days after received deposit,it base on the quantity of the order.

Q4: What's your payment term?
A: We accept T/T, L/C,Western Union.Other payments accept through negotiation.

Q5:What's your trade term?
A: We accept FOB ShangHai or Ningbo,CFR,CIF,EXW term

Q6: Where is your factory located? How can I visit there?
A:Our factory is located in Ningbo City, Zhejiang Province, China, about 30 minutes away from Ningbo Lishe Airport .All our clients, from home or abroad, are warmly welcome to visit us!