Good Quality ExactCables 2 core Shielded 305m Roll Fire Alarm System with Wire 1x2x0.2

Product Description

Single or Multi Twisted Pair Screened Shielded Fire Rated Alarm Cables for High Safety Requirements

Wiring Solution for Intelligent Fire Alarm System                                                               

The fire alarm system is composed of a trigger device, a fire alarm device, a linkage output device and other auxiliary function devices. It can take effective measures in time to extinguish the initial fire and minimize injuries, death and property damage and loss caused by the fire.

UL 1424 FPLR TYPE-POWER LIMITED Fire Alarm Cable

                                                     

The UL listed FPLR type shielded power limited alarm riser cable is suitable to be use in a vertical runs in signaling & fire alarm system. It works in high temperature levels.

This cable is constructed with  FR-PVC insulation and outer jacket with aluminum and  PE tape shielding that meets UL 1666 specifications. It also complies with VW - 1 Flame Test requirements in ANSI/UL 1581. Tested as per ANSI/UL 1666 for flame propagation height of electrical and optical - fibre cables installed vertically in Shafts.

MARKING:

Power - Limited Fire Alarm Cable 4X18AWG Solid Shielded type FPLR (UL) Listed E528881 105°C  EXACT 2024 / 001m…100m
 

Description:

Rated Temperature (oC):                  1050C
Product Standard Certification:         UL file E528881
Reference Standard:                         UL Subject 44,FPLR & UL 1424 & UL 13 &EN50575
Application:                                        Fire Protective Signaling Circuits, Smoke detectors,
                                                          Strobes/Sirens, Pull stations, Voice communications,                                                                                                    Burglar alarms,  Audio, control,initiating & notification                                                                                                   circuits, Microprocessor/Addressable Controlled Systems

CONSTRUCTION:
 

Conductor	Solid Bare Copper
AWG	18
Conductor Diameter Nom.	1.02 ± 0.02mm
Insulation	PVC
Average thickness (±0.05mm)	0.38
Min. Point thickness (mm)	0.25
Insulation ID (±0.2mm)	1.85
PET	coverage > 125%
Aluminum Foil thickness	thickness 0.025mm
Aluminum Foil	coverage > 125%
Drain Wire	TC 0.5mm
Cable Lay Length	80 --------- 120mm
Jacket	PVC
Average thickness (±0.05mm)	0.7
Min. Point thickness (mm)	0.5
Outer Diameter	6.0 ± 0.2mm

PERFORMANCE:JACKET:

Electrical Characteristics
Operating Voltage	300V
DC Resistance	21.4 Ohms/Km @ +20 0C
Insulation Resistance	200MΩ.Km
Mechanical Properties
Insulation tensile strength before aging      (MPa)	≥12.5
Insulation elongation before aging	≥ 200%
Insulation aging conditions	1350C 168H
Change rate of tensile strength after insulation      aging	± 25%
Elongation change rate after insulation aging	± 25%
Jacket tensile strength before aging(MPa)	≥12.5
Jacket elongation before aging	≥ 250%
Jacket Aging conditions	1350C 168H

 

Product packa

QUALITY POLICY:

Exactcables will manufacture cable according to customer's requirement in an effective and profitable manner. To achieve the above, the Management is committed to the following:

• Maintain the ISO 9001 Quality Management System
• Continual review and improvement of the effectiveness of the Quality Management System
• Provide all necessary resources to manufacture quality cable
• Create a safe and technologically advanced working environment
• Respect for the environment in which we operate
• Training and communication to keep employees informed and involved

Every employee has the responsibility to ensure that these requirements are met.

 

FAQ:

Q1: What kind of cable do you produce?
A: We specialized in producing Fire alarm cables, Alarm/security cables, Speaker cables, Coaxial cables, Data cables, HDMI cables, telecommunication cables, telephone cables, power cables and other various of cables and wires
We also provide cable accessory products such as connector, cable clip,cable tie,crimping tool, antenna dishe,splitters,amplifer,optical receiver,optical transmitter etc

Q2: What's your MOQ? Can you offer free samples?
A: Our MOQ is 10KM per item. Free samples can be sent to you if available in stock,freight cost need to be paid by your side.

Q3: What's your delivery time?
A: Normally, our delivery time is 15 days after received deposit,it base on the quantity of the order.

Q4: What's your payment term?
A: We accept T/T, L/C,Western Union.Other payments accept through negotiation.

Q5:What's your trade term?
A: We accept FOB ShangHai or Ningbo,CFR,CIF,EXW term

Q6: Where is your factory located? How can I visit there?
A:Our factory is located in Ningbo City, Zhejiang Province, China, about 30 minutes away from Ningbo Lishe Airport .All our clients, from home or abroad, are warmly welcome to visit us!